|
Post by crashdive123 on Aug 18, 2012 5:40:01 GMT -7
|
|
|
Post by WILL on Aug 18, 2012 17:25:14 GMT -7
Very interesting. Thanks
|
|
|
Post by woodyz on Aug 18, 2012 17:54:00 GMT -7
Nice lesson, thanks for posting.
|
|
|
Post by crashdive123 on Aug 19, 2012 6:10:10 GMT -7
Here is part 2 of the tutorial.
|
|
|
Post by Georgia Survivor on Aug 19, 2012 13:50:38 GMT -7
Enjoying the video and looking forward to Part 3.
O.S.
|
|
|
Post by crashdive123 on Aug 19, 2012 17:02:46 GMT -7
I foolishly thought that I could make a single video and still have it be a teaching/learning vehicle. I was wrong. Not sure how many parts I'll end up with, but I am finding that more than 20 hours of a knife build will be condensed into one long video, or in this case multiple videos.
|
|
|
Post by WILL on Aug 20, 2012 6:04:11 GMT -7
Can't wait to see phase #3.
|
|
|
Post by crashdive123 on Aug 20, 2012 12:26:58 GMT -7
Should be up later tonight.
|
|
|
Post by garret on Aug 20, 2012 14:40:51 GMT -7
very nice
|
|
|
Post by crashdive123 on Aug 20, 2012 14:43:10 GMT -7
Here's part 3 which covers the hollow grind.
|
|
|
Post by Georgia Survivor on Aug 21, 2012 4:20:18 GMT -7
Still following along.
O.S.
|
|
|
Post by mud on Aug 21, 2012 5:41:44 GMT -7
Great vids crash. You inspired me to hollow grind mine a bit more. It reall adds nice semetry.
|
|
|
Post by crashdive123 on Aug 21, 2012 20:08:55 GMT -7
Here's part 4
|
|
|
Post by thywar on Aug 21, 2012 20:35:44 GMT -7
That's very interesting and I'm hooked on Crashdive videos.
|
|
|
Post by Georgia Survivor on Aug 22, 2012 3:59:40 GMT -7
Looking forward to Part 5.
O.S.
|
|